Safe Chemical Solutions Since 1942
 

RYDLYME dissolves scale on injection molding machine

Injection_molding_main
© 

Rydlyme_logo

 

An injection molding company in Michigan was experiencing problems with one of its 950 Mitsubishi injection molding machines.  The machine was shutting down on high temperatures up to four times a day! Severe scale accumulation in the machine’s cooling system was the cause of the high temperature shutdowns.

 

RYDLYME approach

  • 5 gallons circulated for 2 hours via RYDLYME 10MDC pump system.


RYDLYME results

  • Operating temperature dropped by 20°F resulting in a 20-second decrease from each cycle time. 
  • This efficiency gain resulted in a 30% increase in parts manufactured daily! 

 

 

« Back

 
 

Apex Engineering Products Corporation  |  1241 Shoreline Drive  |  Aurora, IL 60504  |  Tel: 800.451-6291 or 1.630.820.8888  |  Fax: 630.820.8886  |  Made in the U.S.A.

Web site design and development by Americaneagle.com
© 2019, Apex Engineering Products Corporation