Call for more information!

630-820-8888

Which RYDLYME Descaling System?

RYDLYME Descaling Systems are specifically designed to circulate RYDLYME  through a vast array of equipment and systems keeping your facility in peak operating condition. We proudly offer Iwaki seal-less magnetic drive pumps and Yamada high-performance, air-powered double diaphragm pumps. For added convenience, all of our pumping systems are equipped with high-quality Hayward tru-union ball valves and transparent rubber Tygon hoses.

The CE-approved Iwaki seal-less magnetic drive pump is powered by a Weg TEFC C-Face motor (single-phase; 60Hz, 115/230v at 3,420rpm). The Yamada double-diaphragm pump is ideally suited for high-head RYDLYME cleaning applications requiring air supply pressures between 20 and 100psi. Renowned for their durability and reliability, these self-priming pumps are fitted with lubrication-free air control valves, mufflers, filters, and regulators. Our regulators are designed to accommodate variable flow rates that even comply with explosion-proof requirements.

  • All
  • Less Than 1000 Gallons
  • Less Than 50 Gallons
  • Less Than 500 Gallons

Industrial Descaling System 15MDC

*CALL FOR LEAD TIME*

The 1.5” unit is assembled on a 2’X4′ heavy duty plastic cart with 8” swivel wheels. This high quality system contains a 30-gallon circulation bucket with a drain valve coupled via bulkhead fittings to multiple true-union valves for simplistic operation.

Industrial Descaling System 10CIP

*CALL FOR LEAD TIME*

The Industrial Descaling System 10CIP (Clean in Place) is designed for cleaning in confined or hard-to-reach areas. The versatile system contains a 15-gallon bucket, two 10′ Tygon hoses, and a ½ HP pump secured on a steel frame hand truck with 8” pneumatic wheels. The pump motor operates a 3450 RPM, 115/230V, 60 Hz and utilizes a Teflon-coated cast iron body, bar form impeller, rotary graphite seal, and a ceramic seat.

Industrial Descaling System 10MDC

This 1” Complete Descaling Pump System is specifically designed to clean your smaller water-fouled equipment. This system includes a 10MDO magnetic drive pump, three Tygon 1” diameter 10′ hoses, and bulkhead fittings all packaged in a 14-gallon recirculation bucket. The bucket comes predrilled for the bulkhead fittings. Minor assembly required.

Industrial Descaling System Pumpmaster 115V

The PumpMaster 115v Industrial Descaling System comes with a 3/4-inch, seal-less magnetic twin-bearing pump. The PM115 is constructed with durable material, includes power supply cord, robust 12-gallon plastic base and two 3/4-inch diameter 10′ Tygon hoses. Features a centrifugal pump design equipped with a Totally Enclosed Non-Ventilated (TENV) permanent magnetic motor that produces a maximum flow rate of 4.5 GPM. Minor assembly is required.

15MDO Pump

The 1.5” 15MDO Iwaki Walchem Magnetic Drive Pump Only is a seal-less .75Hp centrifugal type constructed with long lasting materials perfectly suited for RYDLYME.

10MDO Pump

The 1” descaling system 10MDO Iwaki Walchem Magnetic Drive Pump Only is a seal-less .5Hp centrifugal type constructed with long lasting materials perfectly suited for RYDLYME.

Industrial Descaling System 10PPC

*CALL FOR LEAD TIME*

The 1” pneumatic descaling system cart is a versatile unit assembled on a 2’X4′ heavy duty plastic cart with 8” swivel wheels.

15PPO Pump

  • 1.5” double-diaphragm air-powered pump
  • Polypropylene body unit weighing 80lbs
  • Self-priming; dry start; minimal maintenance with no moving parts that come in contact with liquid or rotating parts to wear
  • Capable of operating 100 GPM at 230′ of head
  • Includes .5” filter/regulator

10PPO Pump

  • 1” double-diaphragm, air-powered pump
  • Polypropylene body unit weighing 29lbs
  • Self-priming; dry start; minimal maintenance with no moving parts that come in contact with liquid or rotating parts to wear
  • Capable of 43 GPM at 230′ of head
  • Includes 3/8” filter regulator

RTK Tankless Hot-Water Descaling Kit

  • 5 gallon circulating bucket
  • 5.8 GPM submersible pump
  • (2) 6-foot hoses
  • (1) Mounting clamp
  • (2) Quarts of RYDLYME 
    Biodegradable Descaler

Biodegradable and NSF/ANSI 60 certified.

Drum Pump 75LDP

  • ¾” connection
  • Polypropylene body unit weighing 8 lbs
  • Self-priming; dry start; minimal maintenance with no moving parts that come in contact with liquid or rotating parts to wear
  • Capable of operating 42gpm no head
  • Includes .5” filter/regulator

Industrial Descaling System 15PPC

*CALL FOR LEAD TIME*

The 1.5” unit is assembled on a 2’X4′ heavy duty plastic cart with 8” swivel wheels. This high quality system contains a 30-gallon circulation bucket with a drain valve coupled via bulkhead fittings to multiple true-union valves for simplistic operation.